Conmed Hyfrecator Plus 7-797

Description

Conmed Hyfrecator Plus 7-797
With a multitude of applications in such diverse specialties as dermatology,
plastic surgery, gynecology, dental and oral surgery, ophthalmology, otolaryngology,
proctology, and urology, the Conmed Hyfrecator Plus 7-797 lets you perform a wide
variety of desiccation, fulguration, and coagulation office procedures.
The ConMed Hyfrecator Plus 7-797 includes a foot control pencil with 10 foot (3.0 m)
cord, foot pedal, and sterile sheaths. The Hyfrecator Plus 7-797’s electronic circuitry
provides a near linear power output. It provides precision whether it’s being used at
full power for broad surface coagulation or low output for delicate facial procedures.
ConMed Hyfrecator Plus 7-797 Specifications
Power Requirements: 120 V, 50/60 Hz.
Output Power:
Bipolar: 30 ± 6 Watts (500 Ohm load).
High: 30 ± 6 Watts (1000 Ohm load).
Low: 15 ± 3 Watts (500 Ohm load).
Maximum Power: 36 Watts (500 Ohm load).
Open Circuit Voltage:
Bipolar: 3000 Vp-p Max.
High: 7000 Vp, 10000 Vp-p Max.
Low: 4000 Vp-p Max.
Frequency: 500 KHz at 31.25 KHz rate.
Output Wave Shape: Damped sinusoidal.
Output Regulation: ± 30% at 30 Watts (500 Ohm load) for a ± 10% line voltage.
Duty Cycle: 10 seconds on, 30 seconds off.
Audio: 1 KHz and 2 KHz, 65 db minimum.
Display Reading:
Speed 0 – 30: 10 seconds.
Accuracy: 1% at any setting.
Low Output Terminal:
0 – 5 Range: 0.2 watt increments.
5 – 15 Range: 1 watt increments.
Bipolar and High Output Terminals:
0 – 30 Range: 1 watt increments.
60 Hz Leakage: 50 microamps max. third wire of line cord open.
Bipolar RF: Power reduction ratio is greater than 80% of maximum output.
Dimensions: 7.5″ (H) x 4″ (D) x 8.75″ (W) (190 mm x 102 mm x 222 mm).
Weight: 6 lbs (2.7 kg).